Skip to main content
Version: 0.8

Construct Training Data

Overview​

Tecton makes it easy to correctly create training data from your features. Constructing training data in Tecton involves three main steps:

  1. Creating the feature service that assembles the features you want, if you do not already have one.
  2. Selecting the keys and timestamps for each sample you want in your training data. We call these the training events.
  3. Requesting the training data from the Feature Service by giving it the DataFrame of training events.

Overview - Steps to Constructing Training Data in Tecton

Pre-requisites​

  • Feature Views – you need to have at least one Feature View, where the feature transformations you want are defined.
  • Data Sources – you need to have at least one Data Source, from which your Feature Views will source data.

A Note on Point-in-time Correctness​

Tecton's training data generation API requires specifying a timestamp key for each sample. This timestamp is needed to produce what we call point-in-time correct feature values.

Why is this important? When training a model, data from before the prediction generation time is fair game, but data from after that moment should not be included. After all, at prediction time, you only have information from the past. Your models should be trained under this constraint as well. Failing to do so will lead to inflated offline performance metrics that the model will not achieve online.

Let's consider an ads click through rate use case.

Point-in-time Correct Joins - shown as points on a timeline

If you want to use the prediction to make a decision when you are about to show an ad, then the timestamp should be the ad impression time. Note that prediction generation timestamps are different per sample! This per-sample point-in-time correct feature value generation is fairly tricky to implement. Fortunately, this works out of the box with Tecton.

Different prediction scenarios will require a different choice for the timestamp, and the choice depends heavily on your modeling approach. We will discuss this further in section 2.2.

1. Creating a Feature Service​

In Tecton, a Feature Service is used both to serve features to production models, and to create training dataset for model training. You can create a Feature Service by writing a definition file.

Let's imagine you have created a number of different Feature Views for this modeling task. Pulling them together is as simple as importing them and listing them under features in your Feature Service definition.

ad_ctr_feature_service = FeatureService(
name="ad_ctr_feature_service",
description="A Feature Service providing features for a model that predicts if a user will click an ad.",
features=[
user_ctr_7d,
user_click_counts,
user_impression_counts,
user_ad_impression_counts,
user_distinct_ad_count_7d,
],
)

For every Feature View you want to include, import them into your Feature Service definition file, and list it under the features key. Once it is ready, save it, and run tecton apply to create the Feature Service.

Next, let's generate a list of samples and timestamps which we will pass to the Feature Service.

2. Selecting sample keys and timestamps​

Given a list of sample keys, and a timestamp for each key, Tecton's Feature Service will return all the feature values for that sample as they were at the time you specified. As we mentioned earlier, this key is critical for preventing future signals from leaking inappropriately into training data where they do not belong.

2.1 How do we get that timestamp?​

Let's imagine we have two tables for our ads click through rate task:

  • A time-series table of ad impression events ad_impressions, with a user_id, ad_id, and a timestamp
  • A time-series table of ad click events ad_clicks, again with a user_id, ad_id, and a timestamp

Using this data, we want to estimate the likelihood that a user will click a given ad in the 30 mins after it was shown.

In our DataFrame of training events, we need to have:

  • The entity keys - i.e. the user_id ad_id pair
  • The timestamp – in this case, this should be the timestamp of the ad impression event
  • Optionally, the label - in this case, this would be whether there was an ad click event within 30 mins of the timestamp for the same user_id ad_id pair. In a training scenario, you'll need the label to train your model, however, this field is optional for retrieving features from Tecton.

Thus, a query to generate training events might look like this.

SELECT
ad_impressions.user_id,
ad_impressions.ad_id,
ad_impressions.timestamp,
(
ad_clicks.timestamp IS NOT NULL AND
(JULIANDAY(ad_clicks.timestamp) - JULIANDAY(ad_impressions.timestamp)) * 1440 < 30
) as label
FROM ad_impressions
LEFT JOIN ad_clicks
ON ad_impressions.user_id = ad_clicks.user_id AND ad_impressions.ad_id = ad_clicks.ad_id;

Which might generate a DataFrame of training events that looks like this:

user_idad_idtimestamplabel
110012021-05-28 10:00:001
110022021-05-28 10:10:000
210012021-05-28 10:23:001

Passing this to the Feature Service as a DataFrame, will enable you to leverage Tecton's point-in-time correct joins to full effect. We will discuss this more in section 3.

note

When building an events DataFrame with Tecton on Snowflake, you can use the query_snowflake() function, that is provided in Connecting Snowflake Notebooks, to query against one or more Snowflake tables and/or views.

2.2 Choosing the Prediction Time Context​

To choose the right timestamp, it is important to think through the time context in which your model will make a prediction. For example:

  • In a credit card fraud use case, the prediction time context might be right before you would have charged the credit card. Activities post transaction shouldn't be used, since it would not have been available at the time the card is charged.
  • In a matchmaking use case in a dating app, the prediction time context should be right before the recommendation was made. The matched users might exchange messages after, but that information would not have been there when the recommendations were made.

If you have an event that corresponds with the moment of prediction generation, that timestamp will work great. More generally, event tables in your data system are a good place to look for an appropriate timestamp. If you do not have event records at the right granularity, you may have to find a proxy or do some rearchitecting to take advantage of point-in-time correct joins.

Ultimately, the correct training event generation query is dependent on your framing of the modeling problem. A different problem framing will require a different set of queries and joins.

2.3 How Tecton uses the Timestamp​

Under the hood, Tecton is tracking feature values and how they change over time. When given a timestamp in the training data generation request, we perform a lookup for each individual key and reconstruct the feature values as they would have been at the requested time.

Given a row with join keys and timestamps:ForUser = Key...get last feature value prior to timestampFeature A900209718912609Feature B818093726240055420Feature C0950907900902720...return feature values for that key as of timestamp:

To generate training data, Tecton uses an AS OF join (also known as a point-in-time join) to join training event timestamp with the _effective_timestamp (calculated internally) of the features.

An AS OF join is a join of two tables using the timestamp column in each table. For a given record r in the first table, the record in the second table that has both the closest timestamp to r and is less than or equal to r's timestamp is returned.

The _effective_timestamp is the earliest time the feature will be available in the online store for inference. The _effective_timestamp is always greater or equal to the feature timestamp. The sections below explain how the _effective_timestamp is calculated.

How the _effective_timestamp is calculated for Batch Feature Views​

For Batch Feature Views, the _effective_timestamp of a feature is calculated by adding the start time of the materialization job (according to the batch_schedule) to data_delay (the amount of time to wait before the job starts).

How the _effective_timestamp is calculated for Stream Feature Views​

For Stream Feature Views with built-in time-window aggregations, the _effective_timestamp is calculated as follows:

  • When the stream_processing_mode parameter is set to StreamProcessingMode.TIME_INTERVAL, the _effective_timestamp is the end of the last aggregation_interval.

  • When the stream_processing_mode parameter is set to StreamProcessingMode.CONTINUOUS, the _effective_timestamp is the feature timestamp.

For Stream Feature Views without built-in time-window aggregations, the _effective_timestamp is the feature timestamp.

How to see the _effective_timestamp​

The _effective_timestamp column is automatically added to all feature records returned by calls to get_features_for_events() which do not include a DataFrame of training events.

3. Requesting Training Data​

You can generate your training data using the Feature Service you defined above by passing the events as a DataFrame to the Feature Service using the get_features_for_events method.

events = execute_query(...)

ws = tecton.get_workspace("prod")
fs = ws.get_feature_service("ad_ctr_prediction_service")
training_data = fs.get_features_for_events(events, timestamp_key="timestamp", from_source=True)

training_data contains the join keys, timestamps, and values for all the features in the Feature Service, and any other columns that were in events. Tecton then joins all of the relevant feature values for each row in events, and passes that back to you so that you can train your models.

If you would like to save this dataset for reuse later, or to share it with your team, just set the save parameter to True in the get_features_for_events() call.

training_data = fs.get_features_for_events(events, timestamp_key="timestamp", save=True)

Converting the training data into a Snowpark DataFrame and use it with a DataFrameWriter​

note

This section applies to Tecton on Snowflake, only.

Convert the DataFrame returned by get_features_for_events() to a Snowpark DataFrame:

training_data_snowpark = training_data.to_snowpark()

Using the Snowpark DataFrame, you can access its write property to create a Snowpark DataFrameWriter object. With this object, you can call the save_as_table() and copy_into_location() methods to save the data in the Snowpark DataFrame to a Snowflake table and to an external file, respectively. The following example shows a call to save_as_table():

training_data_snowpark.write.save_as_table("<table name>", mode="overwrite")
note

Using a Snowpark object (such as a DataFrame or DataFrameWriter) in a notebook requires that Snowpark be installed in the notebook.

To install Snowpark, refer to the Connecting Snowflake Notebooks page.

Was this page helpful?

🧠 Hi! Ask me anything about Tecton!

Floating button icon